Schewanick Computer Services

As much as the number of people who open an account for domain names increase, the numbers of people who wish to change domain names also increase. Well, this is just a common situation in the domain name arena today, and many people where doing such adjustments even daily.

How to change domain names is the primary concern of this page. So, if you are one of those hundreds of people who wanted to change domain names, but always fall to trap of wondering how to change domain names, this page is definitely right for you.

So to change domain names, you need to know several things. One is that, you document and then break all trust connections that exist between the domains whose name you will be adjusting and all the other domains. You should make sure that you remove the trust entry on both sides of the trust. After which, you end all BackOffice services such as the Microsoft Exchange Server, SQL Server, and the Internet Information Server. Set the startup to manual on all these services. So then change domain names on the PDC.

If such steps to change domain names are done, you need to reboot the PDC. Rebooting will cause the entry for the new domain to surface in the WINS server. And if you are applying WINS for NetBIOS over the TCP/IP name resolution, you force the copying from the PDC's primary WINS server to all other WINS servers to transmit the entry for the changed domain. It is also important to consider that the name resolution to the PDC is significant for every BDC for successfully changing to the new domain name.

Then to change domain names, you reboot the domain name and restart. After that, you need to force the copying from all WINS servers to transmit the entry and if done, reestablish the trust connection. After that process on how to change domain names, you should also re-enter the service account for each of the BackOffice services that were ended in step two. Pick the account by applying the Startup button instead of typing in the account name and then set the services back to Automatic startup, if necessary. Then you reboot the services in the proper sequence.

Finally, to change domain names, you should change domain names on each member server or workstation. But for the down level clients such as Windows 95 or Windows for Workgroups, it is necessary to change the workgroup names to the new domain names. And then the synchronization of the entire domain ends the process to change domain names.

About the Author: Laurie Mitch is a domain name specialist who writes for http://www.DomainsWithTraffic.com

Source: www.isnare.com